Rebreather style 301 Stainless hose clamps (set of 4)

These are very similar if not identical to the very expensive rebreather hose clamps seen on other sites. The clamps come in sets of 4. Two clamps are 13 to 32mm X 8mm width and the other two will be 19 to 44mm X 8mm width. They work perfectly with the typical US divers/Voit 1.5 inch and 1/2 inch hose ends. These clamps are a little less wide than the OEM US Divers hose clamps and probably would look great with some electrical shrink wrap on them.

This is for 4 clamps. You will not get the plastic clamps that are in some of the photos for comparison.

Siebe Gorman Merlins used a very similar clamp.